Designed for the longitudinal cutting of conveyor belts
The side guides prevent lateral movement ensuring a perfect,
straight cut of the belt with a constant width.
2 trapezoidal blade holders (with 20 spare blades)with
firm positioning A metre counter that enables the cut length
to be checked at all times.
It allows rolls with a maximum diameter of 1,500 mm and
a weight of 2,500 kg to be cut, when their maximum width
is 2,150 mm (for rolls with a width of up to 1,000 mm, the
maximum bearable weight is 2,000 kg, centred on an
The initial cutting speed varies between 0 and 8 m/min,
slowly increasing in proportion to the diameter of the roll.
However the cutting speed may be adjusted as necessary,
using the potentiometer to control the frequency converter
which, in turn, regulates the motor.
Expandable pneumatic axle along its full length, thus guaranteeing
that the roll is firmly gripped, both in the winder and
Electrical control panel including the speed control potentiometer,
frequency converter, and emergency stop button.
Comes with two reducer-motors , one in the unwinder-rewinder,
and the other in the winder.
Guide rail prevents any lateral movement resulting in a
perfect, straight cut of the belt, with a constant width.
2 blade holders with 20 spare blades.
Meter counter enables the cut length to be checked at all